Pump Mechanical Seal Overhaul Mistakes

1 greater the amount of spring compression seal better. In actual fact , the spring compression excessive friction can cause rapid wear , instantly burning ; excessive compression of the spring to lose the ability to adjust the ring face , resulting in seal failure.
2 ring seal Fig tight as possible . In fact, ring seals tight harm than good. First exacerbate inter- ring and sleeve wear, premature leakage ; Second, increasing the axial adjustment ring , the resistance movement , frequent changes in operating conditions can not make timely adjustments ; Third spring fatigue easily damaged ; four is to make the ring seal deformation, affecting the sealing effect.
3 stationary ring seal tight as possible . Stationary ring seals basically at a standstill , the effect will be relatively tight seal better, but too tight is harmful. One cause static ring seals due to excessive deformation, affecting the sealing effect ; Second, the majority of graphite stationary ring material , generally more brittle , excessive force can easily cause fragmentation ; three is to install , difficult to remove , easy to damage the stationary ring .
4 Impeller lock nut tight as possible . Mechanical seal leakage , the leakage between the sleeve and the shaft ( shaft between the leak ) is relatively common . Generally, the impeller shaft between the leak is not locking the lock master , in fact, lead to leakage between axes many factors , such as the failure of inter-axis pad , offset , there are impurities between axes , with the shaft and sleeve at a larger shape bit error , the contact surface damage , there is a gap between the shaft parts , threaded shaft is too long , and this will lead to leakage between the shafts . Lock nut locking pad between axes can only lead to excessive premature failure , contrary moderate lock locked mother , so that the shaft between the pads always maintain a certain degree of compression flexibility in operation will be automatically timely lock nut locking , so that the shaft is always in a good inter- the sealed state .
5 The new better than the old . In contrast, using the new mechanical seal better than the old , but the new mechanical security stickers quality or choice of material is not the time , with the larger size of the error will affect the sealing effect ; and permeability in the polymerization medium, the stationary ring without excessive wear, or not to replace as well. Because static ring stationary ring seat for a long time in a quiescent state , the polymer and impurities deposited as a whole, played a good seal.
6 overhaul better than not split . Once the mechanical seal leakage will be eager to overhaul , in fact , sometimes sealed and not damaged , simply adjust the working conditions or thecontainer seal can be adjusted to eliminate leakage. This way to avoid waste and to verify their ability to judge the fault has accumulated experience in maintenance to improve the quality of maintenance .