Rotating cell to ring mounting method

Installation Instructions:
1 cusp requirements deburring, vehicle seals chamfering blunt or install seals case of thread, requiring additional protection to prevent damage to seals.
(2) Any rust , dirt , debris or foreign particles must be removed.
3 not allowed to use the tools with sharp corners .
4 Before installation , cylinder, rotary shaft and seals need to apply oil or grease . If grease, its composition does not contain solid additives ( such as molybdenum disulfide, zinc sulfide or the like ) .
5 . PTFE slip ring can be in oil or water heated to 80 ~ 120 ℃, PTFE slip ring expands , it is easier to install on the piston or rod .
Mounting shaft rotary Grameen circle :
Shaft rotation Grameen ring is usually installed in a closed groove :
1 . The first O-ring into the groove , while pressing the PTFE slip ring heart shape , but be careful to prevent breakage
(2) the state of the pressure on the slip ring PTFE O- ring , and then a rod ( usually with 10 ~ 15 °) direction of the arrow Flatten PTFE slip ring , to restore the original size security seals .