Leakage gasket

The gasket leakage :
General gasket leaks , there are four forms: interface leak , leak penetration , diffusion leaks, damage leak.
Interface Leak : The interface is not as gasket compression flange surface finish combined with improper flange deformation etc will leak in the sealed interface . For interface World leakage , the use of padded material can be clamped against the flange surface .
Penetration leak: Because the soft material of the material are mostly fiber, easy to dip appropriate media , in particular pressure . Due to capillary phenomenon,Fixed Length plastic seals the medium will penetrate into the low pressure side to form infiltration.
Diffusion Leakage: poor concentration , driven by the media or by sealing the gap sealing material produced by mass transfer and capillary leak . Diffusion is the result of molecular motion , and not one-way. Minimal pressure or vacuum in a sealed state , or sealed nitrogen, hydrogen and other permeable substances, as well as highly toxic , radioactive substances should pay special attention penetration and proliferation of two kinds of leaks.
Destruction Leakage: sealing parts relatively poor working conditions , thermal deformation, often affected by vibration, shock , improper installation , fastening force is too large , used repeatedly , deformation , stress concentration, fatigue strength and damage than the material aging , deterioration etc will cause damage leak. pull tight seal This leakage causes the greatest impact hazard is also large , to strengthen prevention.