Rubber seal off how do

Glass installation loose rubber seal off how to do? Glass installation is not centered, glass sash gap with uneven rubber seal is not close to the glass and window frames, installation is not flat. Hand knock glass, loose sound.

The reason for this situation:

1 When installing the glass did not clear the debris inside the slot, and the slot right in the glass.

2 glass with glass notch uneven gaps, seals and glass tank exposed, protruding notch glass,indicative seals hand sealing tape can be easily pulled off.

3 in the corner of the rubber is not disconnected, not injection of glue.

Corrective measures are:

1 carefully before installing the glass to clear the debris inside the slot, such as mortar, brick dust, wood, etc., should be carefully placed on the glass, ensuring that both sides of the gap is uniform, and timely than the regular fixed to prevent collisions shift deviation notch center.

2. Rubber seal can not pull too tight, cutting length than the length of the long assembly 2O-3Omm. When installing the mosaic in place, flat surfaces, and glass notch in close contact, so that the glass surrounding the force evenly. In the corner of the rubber should be beveled off and disconnect the injection of glue at the firm.

3 When caulk sealant fixed glass, you should use rubber or rubber block and choked the glass, leaving a gap of plastic injection, plastic injection depth should not be less than 5mm, before the glue curing, the glass should be kept free from vibration.nylon cable tie Installation is not centered, glass frames with uneven gaps, not close to the glass sealing strips and window frames, installation is not flat. Hand knock glass, loose sound.