security seal labels cylinder made of metal, plastic Outsourcing ABS plastic, for clip spring lock body structure, lock body surface using blanching, laser type and serial number, bar code, color can be customized according to user requirements, wire diameter φ1. 8, the length can be produced according to user requirements, pulling up to F ≥ 250KG. Scope: For Customs containers, tankers, container trucks and other purposes.
2013年6月24日星期一
How to use 3M double-sided adhesive sealing strip installed
1.3M double sided tape width 2.5CM, while the adhesive surface sealing strip width of about 8mm, cut 3.
2 Slowly double-sided adhesive to seal the back side first by sticking together, and then cut with scissors, cut down the side of the part no longer rely on sticky Sarkozy, left stick once again, this can take full advantage of dual- plastic surface. If the car door side seam great, and welcome pedal but not a lot, it is recommended to first do some door edge seal, so that should be able to reduce wind noise.coloured cable ties
3 Wipe the door after sticky side seal, first stick a door seal, use a little effort, then glued down along the door slowly, while double-sided adhesive sticky side torn off the protective paper, try the sealing strip stick neatly whole a good stick, and then press down again enhanced adhesion. After the good results so sticky, gooey environmental effects than much stronger.
4 Next, check the adhesion and sealing strips pulled down not at direct hand off, and only from one side when you can start tearing force to tear off, double-sided adhesive paste with the body part being torn, the other side are stuck on the seal, it appears that double-sided adhesive and the adhesion of the vehicle body and the sealing strip without the adhesion force. Remove the seal on the body after a trace and no, if you stick to the wrong position, then you can easily start over, it is recommended that you use 3M double sided tape.
5 four doors soon stick better. If you find that just closed the door side rear door sealing strips glued along with the body there are gaps, put the seal on the body along the front to the back stick along a whole, so sticky after pulled, actually, and doors sealing strip along the door seal tightly, and did not feel a storm door changed.metal cable ties
6 a vehicle generally used automotive sealing Treaty 10 m, 3M double sided tape about 3 volumes.
This bonding method should be very good, not only to ensure the construction quality, but can also be reworked sticky wrong, it is strongly recommended to everyone.
订阅:
博文评论 (Atom)
没有评论:
发表评论