Seal doors and windows Installation Precautions

Glass installation is not centered, glass sash gap with uneven rubber seal is not close to the glass and window frames, installation is not flat. Hand to knock the glass, loose sound.tamper evident tape
Reasons for this situation:
An installation of glass without the timely removal of debris inside the notch, notch the glass and misalignment.
Two glass with glass notch uneven gaps, rubber and glass tank is bad, protruding notch glass, hand seals can be easily pulled off.
3 rubber strip around the corner is not disconnected, do not inject adhesive junction.
Corrective measures are:
1 carefully before installing the glass clear notch within the debris, such as mortar, brick dust, wood, etc., should be carefully placed on the glass, ensuring that both sides of the gap is uniform, and timely than being fixed to prevent collision shift deviation notch center.
2. Rubber seal can not pull too tight, cutting length than the length of a long assembly 2O-3Omm. Should be installed mosaic in place, flat surfaces, and glass notch close contact with the glass surrounding the force evenly. Rubber strip around the corner should be beveled off and disconnect the injection of glue at the firm.
3 with fixed glass sealant caulk, you should use rubber or rubber block glass choked, leaving voids dispensing, dispensing depth should not be less than 5mm, the gel before curing, the glass should be kept free from vibration.plastic seals