Seal oil spill countermeasures Mifengbuyan

1, the master and the basics of identifying counterfeit seal, buy high quality, standard security seals.
2, such as shaft and IKO bearings badly worn; seal rubber aging or spring failure, etc., should be timely repair and replacement of the corresponding parts.
3, If there is lip flange, spring off and seal must be removed when skewed to reload. It should be noted: When the shaft seal spring tension is not enough to wear and when not to arbitrarily tighten the inner spring.
4, the application of agricultural machinery on the cable sealing generally poor working conditions, environmental temperature, dust and more frequently so that mechanical machinery vibration changing the situation by force, to ground inspection, maintenance and repair.
5, in the oil seal lip or shaft position corresponding to clean oil or grease paint. Apply sealant seals the outer ring, with the cardboard part of the shaft keyway wrap to avoid scratches lip seal, seal with special tool will rotate inward pressed, do not be hard hit hard punch to prevent deformation of seal or squeeze off the spring and failure;